| | |
|
| |
| | |
|
|
1791282 - OES9138 Oscillating Edge Sander, 3HP, 1PH, 230V
List Price: $6,219.00
Your Price: $5,299.99
You Save: 15 %
Item Number: 1791282
Personalization
* denotes required field
What type of delivery do you require?*
|
|
Oscillating Edge Sander
The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5 degrees and out to positive 45 degrees. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.
3HP motor with 9" x 138-3/4" abrasive belt handles large workpieces
Oscillates 24 cycles per minute for better finish and longer belt life
9-1/2" x 48" platen with graphite pad offers largest work surface in its class
Rugged bearing-assisted tensioning device for fast belt changes and quick adjust tracking
Pedestal control switch for easy access
Large 11-3/4" x 48" front worktable with 8" vertical travel tilts and 45 degree tilt, includes miter head for angle work
Precision balanced 9" diameter drive drum and 4" diameter rubber coated idler pulley for positive drive and rigid tracking
Large radius end table has 6" vertical travel and 45 degree tilt for any angle and working height needed
Heavy-duty oscillating gearbox and shaft for long maintenance-free use
Hinged guard opens for infinite length sanding
Dual dust collection ports keep work area clean and extend abrasive belt life
Standard Equipment:
Two 4" dust ports
Tilting main and end tables
Platen with graphite pad
Belt Size (in.) 9 x 138-3/4
Belt Speed (SFPM) 3542
Drum Diameter (in.) 4 Outboard, 9 Drive
Dust Collection Minimum CFM Required 1100
Dust Port Diameter (OD/in.) 4
Electrical Controls - Magnetic Starter Magnetic starter
End Table Size (in.) 18 Radius
End Table Tilt (deg.) 40 in and 45 out
Fence (L x H/in.) n.a.
Height 50 inch
Length 83 inch
Model Number OES9138
Motor HP 3HP
Motor Phase 1Ph
Motor Voltage 230V
Net Weight 00 pound
Oscillations Per Minute 24
Overall Dimensions 83 x 32 x 50
Platen Size (in.) 9-1/2 x 48
Prewired n.a.
Ship Weight 870 pound
Table Size (in.) 48 x 11-3/4
Table Tilt (deg.) 5 in and 45 out
Table Working Height (in.) 34-1/2 to 40-3/4
Width 32 inch
|
Product Reviews
|
|
|