Gearhead Lathe
STANDARD FEATURES
Uniquely designed exclusively by JET*ISO 9001 certified manufacturer3-1/8" bore spindle is supported by two tapered and one ball bearingChrome molybdenum headstock gears are hardened, ground, and shavedUniversal gearbox allows inch, metric, diametral, and module pitch threads, no change gears requiredCarriage features one-shot lubrication and Turcite-B on bed sliding surfaces T-slotted compound slide featuring a four-way tool postOne-piece cast iron base absorbs vibration allowing heavier cutsHigh quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and groundRemovable gap allows up to 23-5/8" diameter workFive position automatic carriage stop increases productivityAttractive chrome control levers, dials, and knobs complete this impressive packageTolerance test certificate included
STANDARD EQUIPMENT
10" 3-jaw chuck with top reversing jaws12" 4-jaw chuck12" Face plate Four-way tool post Follow restLarge capacity steady restFully integrated coolant systemFull length splash guard and coolant returnLarge easy to use foot brakeArticulating halogen work lampCentrally located controls with jog buttonThreading dialMountingpads and levelersSpindle sleeve (MT-7 to MT-5)Dead centerLive centerTool box and adjusting tools
SPECIFICATIONS
Model Number GH-1460ZX
Swing Over Bed (in.) 14
Swing Over Cross Slide (in.) 7-5/8
Swing Through Gap (in.) 23-5/8
Length of Gap (in.) 12-1/4
Distance Between Centers (in.) 60
Spindle Bore (in.) 3-1/8
Spindle Mount Dl-8
Spindle Taper (With sleeve) MT-7 (MT-5)
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM) 42 tol,800
Number of Longitudinal and Cross Feeds 122
Range of Longitudinal Feeds (in./rev.) 0.0015 to 0.0913
Range of
Cross Feeds (in./rev.) 0.0006 to 0.0365
Number of Inch Threads 61
Range of
Inch Threads 1-5/8 to 72
Number of Metric Threads 24
Range of
Metric Threads (mm) 0.05 to 20
Maximim Tool Size (in.) 1x1
Maximim Compound Slide Travel (in.) 5-1/8
Maximim Cross Slide Travel (in.) 9
Maximim Carriage Travel (in.) 55
Tailstock Spindle Travel (in.) 5
Tailstock Taper MT-4
Follow Rest Capacity (in.) 1/2 to 3-1/2
Steady Rest Capacity (in.) 3/8 to 7
Width of Bed (in.) 3/8 to 7
Overall Dimensions (in./L x W x H) 116-1/2x40x46-7/8
Motor 7-1/2HP, 3Ph, 230/ 460V Prewired 230V
Net Weight (Ibs.) 5380