690107 - JTM-4VS 3PH Mill with Acc-Rite 200S DRO & X Powerfeed Installed. Plus Free Milling Accessory Kit

Jet Variable Speed Turret Mill
3PH

Standard Equipment
MeehaniteÃÃÃî casting
Precision bored and honed milling head
Large diameter quill is chromed
High precision Class 7 spindle bearings
Chrome plated motor shaft with lower bearing support
Spindle head is internally cooled
Satin chrome finished dials
Heavy-duty splined motor drive
One-piece quill pinion and shaft
Three-stage power downfeed with automatic stop
Heavy-duty spindle brake
Locks on all movable surfaces
Precision hardened and ground ways and table
Adjustable gibs throughout
Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
Tolerance test sheet included  One-shot lubrication system
Way covers
Draw bar
Tool box with tools

Technical Information
Table Size (in.) 9x49
Spindle Taper R-8
Diameter of Quill (in.) 3-3/8

Number of Spindle Speeds Variable

Range of Spindle Speeds (RPM) 60 - 4,200

Downfeeds of Spindle (per/rev./in.) 0.0015 - 0.003 - 0.006

Spindle Travel (in.) 5

Head Movement 90ÃÃÃðR&L45ÃÃÃðF&B

Distance Spindle to Table (max/in.) 17-1/2
Distance Spindle to Column (min./in.) 6-3/4

Distance Spindle to Column (max./in.) 19

Collet Capacity (in.) 1/8 - 7/8

Longitudinal Table Travel (in.) (X-axis) 36

Cross Travel (in.) (Y-axis) 12

T-slot Number & Size (in.) 3 and 5/8

T-slot Centers (in.) 2-1/2

Maximum Weight of Workpiece (lbs.) 660

Travel of Knee (in.) (7-axis) 16

Travel of Ram (in.) 12-1/4

Motor 3HP,3Ph230/460VPrewired230V

Overall Dimensions (in./W x D x H) 65-1/2 x 63 x 80

Net Weight (lbs.) 2,420