TS29 Tilt/Slide Shaper

The new TS29 is ready to tackle any job. A new fence design includes dual digital readouts,
micrometer adjustments and independently adjustable fence halves for fast, easy, and accurate set-ups.

The full guard includes two stock hold downs and a see through cover that flip up for quick tool changes.
Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish.

An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt,
adding versatility and insuring long, trouble free performance. Powered by a big 71/2HP motor that drives
the spindle forward and reverse with five speeds.

The massive sliding table is fully supported by six tapered precision bearings through a full four foot stroke.
In addition, on board the table is a large miter head complete with stock hold down clamp and a 56-inch
miter fence with flip stop.

The large table can easily accommodate a stock feeder for longer production runs;
this machine is built to handle any job.

FEATURE

• Sliding table with miter head, hold down and fence
• Fully adjustable fence with dual digital readout
• Large table with built-in slider with room for stock feeder
• 7-inch vertical spindle travel
• Spindle tilts neg. 5 to pos. 45 degrees
• Large diameter multiple table inserts
• Five spindle speeds in forward and reverse with lighted indicator
  
• Can accommodate everything from multiple end cuts to tenons
• Fast and accurate set-up and repeatability
• Supports large work pieces; added safety option with feeder
• Allows user to stack tooling
• Increased versatility with tooling
• Accommodate virtually any size cutter
• The correct speed for any job
  Specifications

Model Number TS29

Stock Number 1791284

Motor HP/Voltage/Phase 71/2HP 230/460V 3PH

Electric Controls 24V magnetic

Spindle Sizes with Capacity Under Nut 11/4" dia. x 61/4", 1" dia. x 6", 3/4" dia. x 31/2", 1/4" and 1/2" collets

Spindle Travel 7" vertical

Spindle Speeds rpm 3,000/4,000/6,000/8,000/10,000

Tilting Spindle 5 deg. back, 45 deg. forward

Overall Table Size L x W 511/2" x 331/2"

Maximum Diameter Cutter Below Table 9"

Maximum Diameter Cutter Above Table 12"

Fence Size (with Dual Digital Readouts) 46" x 5"

Fence Travel (Major and Minor) 53/8" and 35/8"

Slide Table Size 111/4" x 511/4"

Table Travel 491/4"

Table Inserts One tilting, one straight

Dust Connect Diameter (2) 5"

Minimum CFM Required 800

Shipping Weight 1,280 lbs

Net Weight 1,100 lbs

Overall Dimensions 51"L x 44"W x 53"H

Tools Supplied Spindle wrenches, Spanner wrench, Set of open end wrenches, Set of allen wrenches, Grease gun, Tool box