Loaded with features, the new 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life.
The articulating table mounted on the 6 x 48 belt sander head can be used vertically, horizontally, or angled to accommodate any job. The belt head has an indexing pin with stops at 0, 45 and 90 degrees and the head lock allows use at any angle in between.
Removing the top guard facilitates contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.

Specifications

Model:	31A
Stock Number 1PH	1791291K
Motor HP/Voltage/PH	1-1/2HP 115/230V (push button) 1PH
Stock Number 3PH	1791292K
Motor HP/Voltage/PH	2HP 230/460V magnetic 3PH
Belt Size (in)	6 x 48
Disc Size (in)	12
Table Working Height (in)	34 disc, 36 belt
Sanding Arm Locking Positions	0, 45, 90 degrees
Disc Table Size (in)	14-1/2 x 6-1/2
Table Tilt	15 degrees up 45 degrees down
Belt Table Size (in)	13 x 7-1/2