Sandsmart™ control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
Patented conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
22" wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance
Sealed and permanently lubricated drum ball bearings for longer life
Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results
Adjustable drum height and downward pressure feature virtually eliminates snipe
Large cast-iron handwheel adjusts height at 3/32" per turn for precise sanding thickness control
Patented abrasive take-up fasteners make changing abrasives quick and easy
Depth gauge has locking stop to ensure accuracy
On/off switch with overload protection is front-mounted for operator's convenience
One feed and one drive motor for superior sanding control
Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time
Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute

Specifications:

Amps 15.5
Conveyor Motor 43 in.-lbs. torque, direct drive, dc
Conveyor Speed (SFPM) 0 to 10
Drum Bearing Diameter (in.) 1
Drum Diameter (in.) 5
Drum Length (in.) 22
Drum Speed (RPM) 1600
Dust Port Diameter (OD/in.) 4
Family Description 22-44 PRO DELUXE DRUM SANDER
Maximum Board Thickness (in.) 4
Maximum Board Width (in.) 44 (2 passes)
Minimum Board Length (in.) 2-1/4
Minimum Board Thickness (in.) 1/32
Model Number 22-44 PRO DELUXE
Motor HP 1-3/4HP
Motor Phase 1Ph
Motor Voltage 115V
Net Weight 402 pound
Overall Dimensions 52 x 41 x 41
Part Number 638003DXK
Prewired 115V