AFS-1500
Features a handy remote control that can be used to adjust the three speeds, timer and on/off.

Quietly cleans and filters the air in your shop while you work. Filtering 98% of all particles 5 microns in size and 85% of all particles 1 micron in size.

Use in conjunction with a JET dust collector for maximum dust control.

Unit comes complete with eyebolts to either hang the machine from the ceiling or to sit on on a workbench.

System features a convenient built in timer that can be set at 2, 4, or 8 hour increments. Turn the timer on when you enter the shop and forget about it. System will shut itself off at the hour interval you set.

Constructed of a heavy-duty, powder coated metal box and powerful motor and fan for added durability.

Features a three-filter system so the optional charcoal filter can be added after the two dust filters to help remove odors from the shop if needed.

Comes standard with an electrostatic filter that is electrically charged to help attract more sawdust than other standard filters.

A powerful 1/4HP motor with a large multi fin fan will move high volumes of air to help clear the airborne dust in your shop.

Three speeds to chose from to accommodate every shop need. (1300, 900, 750 CFM).

Filters the air in a 20' x 20' x 8" shop in less than 3 minutes or more than 24 times an hour. Filters the air in a larger 40' x 40' x 10' shop in just over 12 minutes or just under 5 times an hour.

Filters are easily replaceable and require no tools.

Comes with the necessary hardware to either bolt the unit tight against the ceiling or to hang if from chains. (Chain and ceiling eye bolts not included).

Overload protection for the motor and the electronic board for extra protection.

Adjustable exhaust to direct the air where needed.

The fan spins on a rigid 5/8" shaft with the motor using two full-closed ball bearing.