25"and 37", Single and Double Drum Sander

• Continuous-duty 5HP motor, 208-230 Volt power, single or 3 Phase
• SandSmart automatic control of the infinite-variable feed rate (0-15 ft/min) for the conveyor gives a perfect finish
• Multiple grit sanding in single pass with double drum models
• Precisely dimension stock within .010" across width of sander
• 25" or 37" wide sanding capacity
• Height of the rear drum is independently adjustable in relationship to the front drum
• Optional ProScale depth gauge allows incredible accuracy
• Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex"
• Self-cooling drum with abrasive Take-Up-Fasteners make changing abrasive quick and easy plus keeping abrasives tight
• Sand as thick as 12" with 37" models and 6" with 25" models. Sand as thin as 1/32" and as short as 2-1/4" (single drum) 3-1/2" (double drum) models
• Cast stand, zinc-plated steel bed, centerless ground column tubes
• Dust collection: manditory for all models: 25"-600 CFM min. 37" 1200 CFM min.
• Shipped assembled, some minimal assembly required
• Drum ball bearings are sealed and permanently lubricated
• 20 Amp Electrical Service required on 3 phase, 30 Amp service required on single phase

Accessories: Casters*, Infeed/Outfeed tables, DRO (Digital Depth Gauge), ack-N-Roll (Abrasivestorage Shelf), "Pre-Cut" and "Pre-Marked" Abrasives *(Casters included with 37" models)